TS NON-ELECTRIC DETONATOR
DESCRIPTION
The non-electric detonator is available in 40 delay intervals ranging from 25 ms to 9000 ms. The timing sequence of these non-electric detonators is suitable for tunnels and shafts or mining work where long delays are required between holes to allow the rock to move.
Terms and Conditions
This detonator is designed to be used at the bottom of the hole to initiate boosters, high explosives, or detonator-sensitive emulsions. They can be equipped with a connector to be initiated by detonating cord.
Technical properties
| Detonator casing | Aluminum |
| Shock tube material | Surlyn/PE |
| Load | 720 mg PETN |
| Resistance to hydraulic pressure | 0.3 MPa / 7 days |
| Ideal application temperature | -30ºC to +60ºC |
| Delay Interval | 25, 50 e 100 |
| Detonation velocity | 2000 m/s |
PACKAGING
Non-electric detonators are supplied with shock tubes of: 4.8 / 6 / 7.8 / 9 / 12 / 15 / 18 / 24 and 30 meters. Other wire lengths are possible, subject to order.
STORAGE
Storage must be carried out in dry, ventilated, moderately temperature-controlled, and properly licensed magazines. Detonators must never be stored in the same magazine as other explosives.
LIFESPAN
2 years from the date of manufacture in the original packaging and properly stored.
TRANSPORTATION
Class: 1.1 B | N.º ONU: 0360
Class: 1.4 S | N.º ONU: 0500
Class: 1.4 B | N.º ONU: 0361 ( (upon special request)
ADVANTAGES
Strong initiation energy | Protected primary explosive charge | Excellent water resistance | Wide selection of delays | Reliability and precision.